Abstract
Proton exchange membrane (PEM) fuel cells are being developed as alternative energy sources for both residential and automotive applications. In order for this technology to become fully commercial, reduction of cost and improvements in performance and durability of PEM fuel cells’ membrane electrode assemblies (MEAs) are still required. To address the requirements for further cost reduction, structure and composition of the cathode catalyst layer (CCL) has to be optimized in order to achieve optimum performance and durability while minimizing the platinum group metals (PGM) loading. In order to rationally design CCL structures that meet the performance and durability requirements, a better understanding of structure versus performance relationships is needed. This requires the capability to fabricate different CCL structures, to characterize the spatial distribution of all the phases within the catalyst layer1-3 (carbon, Pt, ionomer, and void), to measure the physico-chemical properties (both ex-situ and in-situ), and, finally, to use these experimental data as inputs for the development of a model-based understanding of the relationship between the CCL structure and CCL performance and durability. Recently, significant progress has been made in reliable measurement and modeling of key CCL properties such as thermal conductivity, electronic conductivity, and gas diffusivity4-7. Dependence of these properties on the CCL structure and manufacturing processes provides support for rational CCL design. References J. Wu, A.P. Hitchcock, M. Lerotic, D. Shapiro, V. Berejnov, D. Susac, J. Stumper, “4D imaging of polymer electrolyte membrane fuel cell cathodes by scanning X-ray microscopy”, Microsc. Microanal., 23, 1784 (2017).V. Berejnov, M. Saha, D. Susac, J. Stumper, M. West, A.P. Hitchcock, Advances in structural characterization using soft x-ray scanning transmission microscopy (STXM): Mapping and measuring porosity in PEM-FC catalyst layers, ECS Transactions, 80, 241 (2017).L.G.A. Melo, A.P. Hitchcock, J. Jankovic, J. Stumper, D. Susac, V. Berejnov, Quantitative mapping of ionomer in catalyst layers by electron and x-ray spectromicroscopy, ECS Transactions, 80, 275 (2017).M. Ahadi, M. Tam, M.S. Saha, J. Stumper, M. Bahrami, Thermal conductivity of catalyst layer of polymer electrolyte membrane fuel cells: Part 1 – Experimental study, J. Power Sources, 354, 207 (2017).M. Ahadi, A. Putz, J. Stumper, M. Bahrami, Thermal conductivity of catalyst layer of polymer electrolyte membrane fuel cells: Part 2 – Analytical modeling, J. Power Sources, 354, 215 (2017).M. Ahadi, M. Tam, A. Putz, J. Stumper, C. McCague, M. Bahrami, Electrical conductivity of PEM fuel cell catalyst layers: Through-plane vs. in-plane, in: European Hydrogen Energy Conference 2018, Costa del Sol, Spain, 14-16th March, paper no. (124), 206 (2018).S. Salari, C. McCague, M. Tam, M.S. Saha, J. Stumper, M. Bahrami, Accurate ex-situ measurements of PEM fuel cells catalyst layer dry diffusivity, ECS Transactions, 69, 419 (2015).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.