Peak-to-Average Power Ratio Reduction in FBMC Using SLM and PTS Techniques

Abstract

Orthogonal frequency division multiplexing (OFDM) is the advanced transmission scheme utilized in 4G. Nevertheless, it has several shortcomings like guard band, peak-to-average power ratio (PAPR), high power consumption, incapable to accommodate various other devices (an IOT application). Hence, OFDM cannot be considered in 5G due to the several disadvantages mentioned above. Filter bank multi-carrier (FBMC) is believed to be one of the most promising technologies which can be used in 5G. FBMC and OFDM are multi-carrier system. It is obvious that it agonizes from PAPR which hamper the efficiency of the system. The conventional peak reduction methods utilized in OFDM cannot be used in FBMC due to the overlapping structure of FBMC. In this work, a novel selective mapping (SLM) and partial transmit sequence (PTS) PAPR reduction technique is suggested for FBMC. The proposed techniques are implemented by using an elementary successive optimization technique that upsurge the PAPR performance and ensure the design difficulty is taken low. PAPR and bit error rate (BER) parameters are analyzed and simulated for the proposed and conventional PAPR reduction techniques. The simulation results show that the SLM and PTS accomplished an excellent PAPR reduction up to 2.8 and 4.8 dB as compared to other peak power minimization techniques.