Abstract

In situ degradation of organic contaminants by Pd and electro-generated H2 and O2 overcomes the drawbacks to traditional Fenton process, and conducting heterogeneous catalyst of FeMgAl layered double hydrotalcite (LDH) further improved the efficiency and stability. Using bisphenol A (BPA) as the model contaminants, 90% removal can be achieved with 1200mg/L Pd/Al2O3 and FeMgAl-2. The reusability was satisfying due to the very limited leaching of Fe ions at 0.1ppm level. FeMgAl also amplified the window of pH for Pd-catalyzed in situ advanced oxidation processes (AOPs) from 3 by homogenous Fe(II) to 3-7 by FeMgAl LDH. The COD of landfill leachate effluent of the MBR system removed by about 52.3% by this system by the initial pH was 5. Characterizations revealed the distinguishing features associated with LDH structure such as large surface area, good stability, basic character, and strong linage among active sites were accounted for the remarkable performances over a wide pH window. Five reactive intermediates were observed and multiple degradation pathways were proposed in Pd-catalyzed in situ AOP for the first time. Interestingly, because of the unique role of Pd catalyst, these degradation pathways were clearly distinguished from traditional Fenton or Fenton-like AOPs and may provide a new approach of in situ heterogeneous AOPs for refractory contaminants in future.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.