Abstract
PbS QDs and PbS QDs decorated with reduced graphene (rGO) are prepared by hot-injection method using PbO and hexamethyldisilathiane (HMDS) as Pb and S sources, respectively. PbS QDs and PbS QDs:rGO are used as an addition to poly(3-hexylthiophene-2,5-diyl):phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) composite. The effect of their addition on the morphological, topographical and optical properties of spin-coated P3HT:PC61BM thin films are investigated. These additions tune the films to be more homogenous and more flatness as investigated in terms of field scanning electron microscope. The topographical properties of the films are explored by atomic force microscope. The results show decreasing in the grain size and the surface roughness in P3HT:PbSQDs:PC61BM film compared to other composites films. The optical properties of the films are studied over the spectral range 200–2500 nm. On one hand, the absorption coefficient of different films is computed and the optical band gap of the films is found to decrease after addition of PbS QDs and PbS QDs:rGO. On the other hand, the refractive index of the films is explained according to the single-oscillator model to get the dispersion parameters. In addition, the lattice dielectric constant and the ratio of the free-carriers concertation to their effective mass are evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.