Abstract
Etching characteristics of (Pb,Sr)TiO 3 (PST) thin films were investigated using inductively coupled chlorine-based plasma system as functions of gas-mixing ratio, radio frequency power and direct current bias voltage. It was found that increasing of Ar content in gas mixture lead to sufficient increasing of etch rate and selectivity of PST to Pt. The maximum etch rate of PST film is 56.2 nm/min and the selectivity of PST film to Pt is 0.8 at Cl 2/(Cl 2+Ar) of 20%. It was proposed that sputter etching is the dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
