Abstract

Epitaxial Ge films were grown on Si(001) substrates by molecular beam epitaxy. During epitaxial growth, two carbon interlayers were deposited at varying substrate temperatures (140−620°C) and with varying C quantity (0−1.5monolayers). The influence of the second carbon interlayer on in-plane strain was investigated using high-resolution x-ray diffraction and transmission electron microscopy (TEM). All samples exhibited compressive strain, which was attributed to substitutional incorporation of carbon atoms. In-plane strain decreases with increasing substrate temperature during carbon deposition, indicating that enhanced surface mobility of carbon adatoms leads to formation of carbon clusters. This was confirmed by cross-sectional TEM investigations. Variation of C quantity at 180°C reveals maximum strain at an intermediate quantity of 0.8 monolayers. Omission of the second C interlayer results in much lower strain, indicating a mismatch between the two Ge layers separated by a C interlayer. This could be used to enforce dislocation filtering following the principle of strained layer superlattices. An upper estimate of 1×10−3 was found for the mismatch strain, resulting in a critical thickness for dislocation filtering of hc=153nm. A sample just exceeding hc exhibited a clear dislocation reduction effect as shown by TEM.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call