Patterning of Metallic Nanoparticles over Solid Surfaces from Sessile Droplets by Thermoplasmonically Controlled Liquid Flow.

Abstract

Optically controlled assembly of suspended particles from evaporating sessile droplets is an emerging method to realize on-demand patterning of particles over solid substrates. Most of the reported strategies rely either on additives or surface texturing to modulate particle deposition. Though dynamic control over the assembly of microparticles is possible, limited success has been achieved in nanoparticle patterning, especially in the case of metallic nanoparticles. This work demonstrates a simple light-directed patterning of gold (Au) nanoparticles based on the thermoplasmonically controlled liquid flow. Excitation at the plasmonic wavelength (532 nm) generates the required temperature gradient, resulting in the particle assembly at the irradiation zone in response to the thermocapillary flow created inside the droplet. Particle streak velocimetry experiments and analysis confirm the existence of a strong thermocapillary flow, which counteracts the naturally occurring evaporative convection flows. By modulating the illumination conditions, we could achieve patterns with various morphologies, including center deposit, off-center deposit, multi-spot deposit, and lines. We successfully applied the developed strategy for realizing closely packed hybrid particle assembly containing different particles: Au and polystyrene particles (PS). We performed optical microscopy, 3D profilometry, and SEM analysis to characterize the particle deposit. We analyzed the periodicity of Au-PS hybrid assembly using fast Fourier transform and radial distribution function analysis. PS particles formed a hexagonal close-packed arrangement at the irradiation zone, with Au NPs residing inside the voids. We believe that the presented strategy could significantly enhance the applicability of the evaporative lithography from sessile droplets for the programmable patterning of metallic nanoparticles.