Abstract
The Ambassador Bridge between Detroit, Michigan, and Windsor, Ontario, has served for almost 100 years as North America's busiest international border crossing. But in 2025, the Ambassador will be replaced by the new Gordie Howe International Bridge. The Gordie Howe is a cable-stayed bridge, with two massive 220 m tall concrete piers on opposite banks of the St. Claire River, a single clear span of 853 m, and 42 m of clearance over this busy waterway. To ensure durability in this harsh freeze-thaw environment, air-entrained concrete is specified throughout. And, to ensure the quality of air entrainment, the ASTM C 457 Procedure C, Contrast Enhanced Method is employed. While a similar automated microscopic approach has been in use for well over a decade according to EN 480-11 Determination of air void characteristics in hardened concrete, this is the first large-scale application of automated air void assessment in North American infrastructure. According to the ASTM Procedure C, the air void characteristics are determined through digital image processing, while the paste content may be determined by either mix design parameters, manual point count, or 'other means'. Of these three options, point counting is used for Gordie Howe; but in parallel, during each point count, the digital image coordinates and phase identifications for each evaluated stop are recorded. This allows for training of a neural network, for automated determination of paste content, as demonstrated here.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.