Abstract
In this paper, the novel two-dimensional (2D) tungsten ditelluride (WTe2) was successfully fabricated by the liquid phase exfoliation method and used as a saturable absorber (SA) for a diode-end-pumped passive Q-switching Tm:YAP laser operating at the 2.0μm wavelength band. The saturable fluence and the modulation depth of the prepared WTe2 SA were determined to be 5.1 μJ/cm2 and 7.2%, respectively. The maximum average output power of 0.64W was obtained with the shortest pulse width of 368ns at a pulse repetition rate of 78kHz. The corresponding highest single pulse energy and largest pulse peak power were calculated to be 4.8μJ and 12.7W, respectively. To the best of our knowledge, this is the first time that WTe2 has been used as the SA for 2.0μm solid-state bulk lasers. The results indicate that WTe2 should be an excellent SA for generating 2.0μm pulsed lasers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
