Passive Rotation Angle Motion Validation for an Ankle-Foot Orthosis Multi-Jointed Surrogate Lower Limb Design.

Abstract

Ankle-foot orthoses (AFO) are devices that assist lower limb motion. Mechanical testing an AFO would ideally load the device while worn on the leg, since AFO function is dependent on intimate leg contact. However, this is not appropriate for cyclic or load-to-failure applications. A surrogate lower limb (SLL) was designed for this AFO testing application, to provide anthropometric 3D movement when subjected to standard test loads. This novel four-joint SLL was inspired by the Rizzoli foot model, which segments the lower limb into five sections. SLL joint prototypes were validated by measuring rotation angles and comparing with typical anatomical ranges of motion. The 3D printed models were within acceptable variability of human joint movement and, therefore, were appropriate for use in the final SSL.