Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence

Abstract

AbstractThis paper investigates the use of a passive control device, namely, a tuned mass damper (TMD), for the mitigation of vibrations due to the along‐wind forced vibration response of a simplified wind turbine. The wind turbine assembly consists of three rotating uniform rotor blades connected to the top of a flexible uniform annular tower, constituting a multi‐body dynamic system. First, the free vibration properties of the tower and rotating blades are each obtained separately using a discrete parameter approach, with those of the tower including the presence of a rigid mass at the top, representing the nacelle, and those of the blade including the effects of centrifugal stiffening due to blade rotation and self‐weight. Drag‐based loading is assumed to act on the rotating blades, in which the phenomenon of rotationally sampled wind turbulence is included. Blade response time histories are obtained using the mode acceleration method, allowing base shear forces due to flapping motion for the three blades to be calculated. The resultant base shear is imparted into the top of the tower. Wind drag loading on the tower is also considered, and includes Davenport‐type spatial coherence information. The tower/nacelle is then coupled with the rotating blades by combining their equations of motion. A TMD is placed at the top of the tower, and when added to the formulation, a Fourier transform approach allows for the solution of the displacement at the top of the tower under compatibility of response conditions. An inverse Fourier transform of this frequency domain response yields the response time history of the coupled blades/tower/damper system. A numerical example is included to qualitatively investigate the influence of the damper. Copyright © 2007 John Wiley & Sons, Ltd.