Abstract

Low-temperature processing for high-performance solar cells based on hydrogenated microcrystalline silicon (μc-Si:H) has been developed using a conventional rf plasma-enhanced chemical vapor deposition (PECVD) technique at an excitation frequency of 13.56 MHz under a high deposition pressure condition. Among pin type solar cells, it is found that deposition temperature of i-layer at 140 °C is effective particularly for improving open circuit voltage (Voc), surprisingly without deteriorating short circuit current or fill factor. Carrier density of undoped μc-Si abruptly decreases for deposition temperatures lower than 180 °C, and the improvement of Voc is ascribed to a decrease of shunt leakage current arising from the oxygen-related donors. This implies that oxygen-related donors can be passivated at low deposition temperatures and that hydrogen plays an important role for the passivation. We propose a simple model for the hydrogen passivation of oxygen related donors. We apply this passivation technique to solar cells, and consequently a conversion efficiency of 8.9% (Voc=0.51 V, Jsc=25 mA/cm−1, FF=0.70) has been obtained in spite of an oxygen concentration of 2×1019 cm−3 in combination with device optimization such as a p-layer. Effect of deposition temperature of i-layer upon other solar cell parameter, short circuit current, and fill factor is also discussed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call