Abstract
The electrochemical behaviour for passivation of new alloy corrosion-resistant steel Cr10Mo1 immersed in alkaline solutions with different pH values (13.3, 12.0, 10.5, and 9.0) and chloride contents (0.2 M and 1.0 M), was investigated by various electrochemical techniques: linear polarization resistance, electrochemical impedance spectroscopy and capacitance measurements. The chemical composition and structure of passive films were determined by XPS. The morphological features and surface composition of the immersed steel were evaluated by SEM together with EDS chemical analysis. The results evidence that pH plays an important role in the passivation of the corrosion-resistant steel and the effect is highly dependent upon the chloride contents. In solutions with low chloride (0.2 M), the corrosion-resistant steel has notably enhanced passivity with pH falling from 13.3 to 9.0, but does conversely when in presence of high chloride (1.0 M). The passive film on the corrosion-resistant steel presents a bilayer structure: an outer layer enriched in Fe oxides and hydroxides, and an inner layer, rich in Cr species. The film composition varies with pH values and chloride contents. As the pH drops, more Cr oxides are enriched in the film while Fe oxides gradually decompose. Increasing chloride promotes Cr oxides and Fe oxides to transform into their hydroxides with little protection, and this is more significant at lower pH (10.5 and 9.0). These changes annotate passivation characteristics of the corrosion-resistant steel in the solutions of different electrolyte.
Highlights
Most reinforced concrete structures are expected to service for at least 75 years without major repairs [1]
The high resolution XPS spectra of Fe-2p, Cr-2p and O-1s signals were deconvoluted into some chemical states which are most probable components needed for corresponding chemical assignments using a deconvolution software XPSpeak version 4.1, based on the average of the binding energies reported in the Handbook of X-ray photoelectron spectroscopy [20] and previous works [21]
Surface composition analysis performed by XPS revealed that the passive film formed on the corrosion-resistant steel consists of Fe and Cr oxides/hydroxides, which presents in two layers with the outer layer mainly composed of Fe oxides and hydroxides, and the inner one enriched with Cr species
Summary
Most reinforced concrete structures are expected to service for at least 75 years without major repairs [1]. This is difficult to achieve, not because of a structural problem but a durability issue. Corrosion of reinforcing steel inside concrete is one of the most important factors that reduce concrete structures durability. In order to minimize or prevent steel corrosion, various methods and techniques [2,3] have been developed and applied, being the most important: concrete cover optimization, electrochemical protection (including cathodic protection, electrochemical realkalization and electrochemical chloride extraction), chemical inhibitors incorporation, epoxy coating on rebar, Materials 2016, 9, 749; doi:10.3390/ma9090749 www.mdpi.com/journal/materials. Materials 2016, 9, 749 reinforcement galvanization, etc These mentioned techniques have drawbacks or limitations, failing to prevent steel corrosion of concrete for enough long time.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
