Abstract

Laser ignition (LI) is emerging as a strong technology to control the oxides of nitrogen (NOx) emissions from spark ignition (SI) engines without the need for any significant exhaust gas after-treatment and is an appropriate technology for meeting future emission norms in the automotive sector. In this study, particulate characteristics of LI engine fuelled with different compressed natural gas (CNG) and hydrogen mixtures [100% CNG, 10HCNG (10% v/v hydrogen with 90% v/v CNG), 30HCNG (30% v/v hydrogen with 70% v/v CNG), 50HCNG (50% v/v hydrogen with 50% v/v CNG) and 100% hydrogen] were investigated. Experiments were performed in a suitably modified single cylinder engine, which operated in LI mode at constant engine speed (1500 rpm) at five different engine loads (5, 10, 15, 20 and 25 Nm). Particulate characteristics were determined using an engine exhaust particle sizer (EEPS). Results showed that particle number concentration increased with increasing engine load. Number-size, surface area-size and mass-size distributions of particulates reflected that addition of hydrogen in the CNG improved particulate emission characteristics especially in nucleation mode particle (NMP) size range (10 nm < Dp < 50 nm). Among the test fuels, hydrogen-fuelled engine emitted the lowest number of particles. It was observed that the difference between particulate characteristics emitted by different test fuels reduced at higher engine loads. Significant contribution of lubricating oil in particulate emissions from both hydrogen as well as HCNG fuelled LI engine was an important finding of this study. Dominant contribution of larger particles (Dp > 50 nm) in total particle mass (TPM) was an important observation of this study. The qualitative correlation between total particle number (TPN) and TPM indicated that suitable fuel composition at different engine loads yielded cleaner exhaust from the LI engine. Overall, this study demonstrated that addition of hydrogen in CNG is advantageous from particulate reduction point of view, however, optimum fuel composition should be adjusted according to engine operating condition in order to reduce particulate emissions.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call