Particle sorting method based on swirl induction.

Abstract

Fluid-based methods for particle sorting demonstrate increasing appeal in many areas of biosciences due to their biocompatibility and cost-effectiveness. Herein, we construct a microfluidic sorting system based on a swirl microchip. The impact of microchannel velocity on the swirl stagnation point as well as particle movement is analyzed through simulation and experiment. Moreover, the quantitative mapping relationship between flow velocity and particle position distribution is established. With this foundation established, a particle sorting method based on swirl induction is proposed. Initially, the particle is captured by a swirl. Then, the Sorting Region into which the particle aims to enter is determined according to the sorting condition and particle characteristic. Subsequently, the velocities of the microchannels are adjusted to control the swirl, which will induce the particle to enter its corresponding Induction Region. Thereafter, the velocities are adjusted again to change the fluid field and drive the particle into a predetermined Sorting Region, hence the sorting is accomplished. We have extensively conducted experiments taking particle size or color as a sorting condition. An outstanding sorting success rate of 98.75% is achieved when dealing with particles within the size range of tens to hundreds of micrometers in radius, which certifies the effectiveness of the proposed sorting method. Compared to the existing sorting techniques, the proposed method offers greater flexibility. The adjustment of sorting conditions or particle parameters no longer requires complex chip redesign, because such sorting tasks can be successfully realized through simple microchannel velocities control.