Particle size – Dependent on the static and dynamic compression properties of polypropylene/silica composites

Abstract

The effect of particle size is widely known as an essential factor that influences the mechanical properties of particulate filled polymer composites. However, there is a limited number of works available, on the particular under dynamic perspective. Based on this, the static and dynamic compression properties of polypropylene/silica composites, with particle sizes of 3μm, 1μm, 20nm, and 11nm, were successfully studied at different levels of strain rates (i.e., 0.01s−1, 0.1s−1, 650s−1, 900s−1, and 1100s−1) using a universal testing machine and a split Hopkinson pressure bar apparatus. Results show that the yield strength, the ultimate strength, and the stiffness properties, of polypropylene/silica composites were greatly affected by both particle size and loading rates. Furthermore, particle size also influences the rate sensitivity and the thermal activation volume of polypropylene/silica composites; where, smaller particle recorded lower rate sensitivity. Meanwhile, for the thermal activation volume, the trend was reversed.