Abstract
High velocity gas jets in fluidized beds provide substantial particle attrition: they are used industrially to control the particle size in fluid bed cokers and to grind products such as toner, pharmaceutical or pigment powders. One method to control the size of the particles in the bed is to use an attrition nozzle, which injects high velocity gas and grinds the particles together. An important aspect of particle attrition is the understanding and modeling of the particle breakage mechanisms. The objective of this study is to develop a model to describe particle attrition when a sonic velocity gas jet is injected into a fluidized bed, and to verify the results using experimental data. The model predicts the particle size distribution of ground particles, the particle breakage frequency, and the proportion of original particles in the bed which were not ground. It was found that the particle breakage frequency can be used to predict the attrition results in different bed sizes. A correlation was also developed, which uses the attrition nozzle operating conditions such as gas density and equivalent speed of sound to predict the mass of particles broken per unit time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.