Abstract

An in situ emulsion polymerization method was used for the synthesis of polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (PAN-PRGO). After that, hydrolyzed polyacrylonitrile nanoparticles amino-functionalized partially reduced graphene oxide (HPAN-PRGO) nanocomposite was achieved by the modification of nitrile groups of the composite polymer chains to carboxylic groups, aminoethylene diamine, and amidoxime functional groups through partial hydrolysis using a basic solution of sodium hydroxide for 20 min. Different synthesized materials were characterized and compared using well-known techniques including transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectra, and X-ray diffraction (XRD). The nanocomposite was structured through the interaction between acrylonitrile’s (AN) nitrile groups and amino-functionalized graphene oxide nanosheets’ amino groups to successfully graft polyacrylonitrile over the surface of functionalized nanosheets as approved by characterization techniques. The synthesized composite was examined for the removal of samarium ions (Sm3+) from water. Different experimental conditions including pH, contact time, initial concentration, and adsorbent dose were investigated to determine the optimum conditions for the metal capture from water. The optimum conditions were found to be a contact time of 15 min, pH 6, and 0.01 g of adsorbent dosage. The experimental results found, in a good agreement with the Langmuir isotherm model, the maximum adsorption capacity of Sm3+ uptake was equal to 357 mg/g. A regeneration and reusability study of synthesized composite up to six cycles indicated the ability to use HPAN-PRGO nanocomposite several times for Sm3+ uptake. The obtained results prove that this polymer-based composite is a promising adsorbent for water treatment that must be studied for additional pollutants removal in the future.

Highlights

  • One of the most worldwide problems is water pollution with different contaminants [1,2,3,4]

  • The synthesized PAN-PRGO nanocomposite was collected by centrifugation and washed several times with water and ethyl alcohol to eliminate excess unreacted acrylonitrile, heated at 70 ◦C overnight for dryness

  • hydrolyzed polyacrylonitrile nanoparticles (HPAN)-PRGO nanocomposite as a novel adsorbent was synthesized successfully and applied for the removal of samarium ions from water

Read more

Summary

Introduction

One of the most worldwide problems is water pollution with different contaminants [1,2,3,4]. PAN-PRGO highly covalently attached nanocomposite was synthesized by the emulsion polymerization of acrylonitrile (AN) with ethylene diamine functionalized graphene oxide (GO), in which surface free amino groups of functionalized GO reacted with the nitrile group of AN for the covalent attachment. This step was followed by formation of carboxylate, amidoxime, and amide groups over the nanocomposite surface by partial hydrolysis of free nitrile groups using NaOH to enhance the chelation and adsorption properties of the nanocomposite toward Sm3+ ions

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call