Partial transient liquid phase bonding of carbon/carbon composites using Ti–Ni–Al2O3–Si compound as interlayer

Abstract

Partial transient liquid phase (PTLP) bonding has been successfully developed to join carbon/carbon (C/C) composites using Ti–Ni–Al2O3–Si compound as interlayer. Gradient interface and core interlayer were formed in the C/C joints by element diffusions, chemical reactions and hot-press sintering. Partial liquid phase infiltrated into C/C matrix and formed ‘nail effect’, which was favorable to improve the mechanical properties of C/C joints. Shear strength and thermal shock resistance of the joints were investigated. The results indicated that the average joint shear strength reached 21.30MPa at room temperature (RT) and nearly did not reduce up to 1273K. The shear strength decreased slowly with increasing thermal cycles from RT to 1373K. After 30 thermal cycles, the strength retention ratio still achieved 73.10%. The excellent thermal shock resistance and high strength retention up to 1373K make the joints to be potentially used in a broad temperature ranging from RT to 1373K.