Abstract
This research focuses on the utilization of thorium-plutonium fuel in pressurized water reactors (PWRs). The reference PWR selected in this research was the Westinghouse AP1000. Thorium-plutonium mixed-oxide (MOX) fuel assemblies partially replaced the uranium oxide fuel assemblies to reduce uranium demand. The cases studied contained 36, 48, 60, 72, and 84 thorium-plutonium MOX fuel assemblies, with the rest of the 193 fuel assemblies loaded with UO2 fuel. The core cycle length, the amount of plutonium incinerated, the amount of generated 233U in the spent fuel, and the conversion ratios were determined using MCNP6. For the different cases, safety parameters such as the power peaking factor and delayed neutron fraction (βeff) were evaluated. The study showed that using thorium-plutonium MOX can achieve good peaking power factors with delayed neutron fractions within the safety limits. Also a conversion factor of about 10% was achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
