Parametric thermal-hydraulic analysis of the DEMO PF coils designed by CEA during the breakdown phase

Abstract

EU-DEMO - the European DEMOnstration Fusion Power Plant, is being designed as an intermediate stage between the ITER experimental reactor and the future fusion power plant. The fully superconducting magnet system of the DEMO tokamak includes six Poloidal Field (PF) coils. Two different concepts of the DEMO PF winding packs are being developed by the EPFL-SPC (Switzerland) and CEA IRFM (France) teams. The current cycle of the PF coils consists of the following phases: Premagnetization (10 s), Plasma Current Ramp-Up (PCRU, 80 s), plasma burn (7200 s) and dwell (600 s). The PCRU phase starts with the fast breakdown (0.8 s), during which the operating current and magnetic field change very rapidly causing significant heat generation due to AC losses. Thus, the breakdown is potentially the most critical phase of normal operation of PF conductors regarding the temperature margin. This study was focused on the thermal-hydraulic analysis of the PF coils designed by CEA during breakdown. According to the CEA design, based on the 2018 DEMO reference, the PF coils are double-pancake wound with square NbTi Cable-in-Conduit Conductors with a central cooling channel. Operation of conductors designed for each PF coil was simulated with the THEA code by Cryosoft. Since the detailed reference current breakdown scenario for the PF coils is not available yet, the analysis was performed parametrically. We took into account the external or internal magnetic field profile along each PF conductor as well as heat generation due to the AC hysteresis losses and coupling losses (for the trial values of the parameter nτ = 100, 200 and 300 ms). The study was aimed at the estimation of the minimum temperature margin in each PF conductor during the breakdown and verification if it fulfills the performance criterion min(ΔTmarg) ≥ 1.5 K. The results of analysis should help in further improvements and optimization of the PF winding packs design.