Parametric Study of Obstacle Geometry Effect on Mixing Performance in a Convergent-Divergent Micromixer with Sinusoidal Walls

Abstract

Abstract This study presents a numerical simulation through computational fluid dynamics on mixing and flow structures in convergent-divergent micromixer with a triangular obstacle. The main concept in this design is to enhance the interfacial area between the two fluids by creating a transverse flow and split, and recombination of fluids flow due to the presence of obstacles. The effect of triangular obstacle size, the number of units, changing the position of an obstacle in the mixing channel and operational parameter like the Reynolds number on the mixing efficiency and pressure drop are assessed. The results indicate that at inlet Reynolds numbers below 5, the molecular diffusion is the most important mechanism of mixing, and the mixing index is almost the same for all cases. By increasing the inlet Reynolds number above 5, mixing index increases dramatically, due to the secondary flows. Based on the simulation results, due to increasing the effect of dean and separation vortices as well as more recirculation of flow in the side branches and behind the triangular obstacle, the highest mixing index is obtained at the aspect ratio of 2 for the triangular obstacle and its position at the front of the mixing unit. Also the highest value of mixing index is obtained by six unit of mixing chamber. The effect of changing the position of the obstacle in the channel and changing the aspect ratio of the obstacle is evident in high Reynolds numbers. An increase in the Reynolds number in both cases (changing the aspect ratio and position of the obstacle) leads to pressure drop increases.