Abstract
In the present study, the aluminum based hybrid composite with Silicon Carbide (SiC) and Boron Carbide (B4C) particles are prepared through the stir casting process and subjected to Abrasive Water Jet Machining (AWJM). The pressure, standoff distance and traverse speed are considered as the input process parameters and the output response such as Kerf angle, Material Removal Rate (MRR) and Surface Roughness (Ra) are measured and optimized using Grey Relational Analysis (GRA). The Analysis of Variance (ANOVA) and the F-test are performed to understand the contribution and the significant level of importance of each input parameter over the output response. The experimental result shows that the traverse speed and the standoff distance contributed more on affecting the performance, with a contribution of 62.14% and 18.43% respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
