Abstract
ABSTRACTRecent technological advancement in flexographic printing has allowed flexography to catch up with other R2R processes such as gravure printing in the printed electronics field. However, there are many process parameters involved in flexography that can affect the print quality. This work attempted to achieve finer line printing compared to the current 45–100 µm printed line width range of flexography by manipulating and studying these process parameters. A design of experiments was conducted to investigate the influence and interaction of various process parameters such as anilox volume, anilox force and printing force on the printed line width. After identifying the key process parameter from the design of experiments, another in-depth study of the key process parameter was conducted to further investigate how printed line width was affected. The results showed that the printing plate was elastically deformed with a range of 50–400 N printing forces. Beyond the 400-N printing force, the printing plate experienced plastic deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.