Abstract
Dissimilar joining of high strength tensile steels are joined using laser beam welding. The selection of the welding conditions for joining of dissimilar materials is highly required to satisfy the quality of the joints. In the present investigation, optimization technique were used to determine the optimal welding conditions. Initially welding conditions were optimized for weld geometry and formation of different zones in the weldment. The metallurgical and mechanical properties of the welds are greatly influenced by the geometry of the welds. The surface response methodology design is carried out for the experimental design by the development of regression equations. Analysis of variance (ANOVA) was used to check the validity of the model. The output of the welding conditions were compared with the predicted values to identify the accuracy of the model. The obtained results from response surface methodology were compared with the experimental results and validated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.