Parameter Observer Useable for the Condition Monitoring of a Capacitor

Abstract

Monitoring the condition of electrolytic capacitors in practical applications is a topic that has been and remains the subject of much research. This article is part of research in this area. It develops a parameter observer (PO) and proposes its use for the determination of the equivalent capacity and equivalent serial resistance of electrolytic capacitors. The observer is an integral-open-loop type second-order system, the input of which is the voltage at the capacitor terminals measured during a two-stage capacitor’s discharging process through a variable resistor. The PO estimates the so-called time constant of the discharging circuit for each of the two stages from which values the capacitor’s parameters are calculated. The use of PO is illustrated for determining the output capacitor parameters of a buck DC–DC converter. The experiments were performed with two electrolytic capacitors with the nominal values 100 μF and 470 μF. Compared with other monitoring methods that use observers, the proposed observer is faster in tracking error mitigation, e.g., 10−3 s in comparison with 5·10−3 s or more. The low computational volume of the discrete-time PO allows the prospect of implementation in real time.