PAPR Reduction in OFDM Signals by Self-Adjustment Gain Method

Abstract

OFDM in 5G wireless communication networks has the advantages of a high transmission volume and data rate. However, the problem of a high peak-to-average power ratio (PAPR) of OFDM signals may lead to serious performance degradation and distortion in the high-power amplifier at the transmitter. In this paper, with the clipping process, the self-adjustment gain (SAG) method is proposed, to tune up the positions of the clipped signals, for reducing the PAPR of OFDM signals without increasing the error probability. The distance between the estimated and clipped signal points in the signal space is measured. An updated process is developed to produce the new signal points based on the measured distance and the self-adjustment gain that is obtained from the clipping noise power and measurement power. The simulation results show that for QPSK/OFDM, SAG reduces up to 2 dB and 0.7 dB more PAPR than ACE with one and three iterations, respectively. For 16QAM/OFDM, SAG reduces up to 1.3 dB and 0.5 dB more PAPR than ACE with one and three iterations, respectively. SAG also outperforms the active constellation extension, with the projection onto convex sets (ACE-POCS) and gradient project (SGP) methods in first two iterations. Hence, the proposed method really reduces the PAPR value more effectively, within an acceptable error probability, and its computational complexity is also much lower in comparison with those methods based on the active constellation extension (ACE) with iterations.