Abstract
We used the finite element method-based toolbox COMSOL Multiphysics to address the important question of biopolymer coronary stent mechanics. We evaluated the diameter of the stent, the immediate elastic recoil, the dogboning and the foreshortening during deployment while using an idealized model that took into account the presence of the balloon and the coronary artery wall (equivalent pressure hypothesis). We validated our model using the well-known mechanics of the Palmaz–Schatz metal stent and acquired new data concerning a poly-L-lactic acid (PLLA) stent and some other biodegradable co-polymer-based stents. The elastic recoil was relatively high (26.1% to 31.1% depending on the biopolymer used) when taking into account the presence of both the balloon and artery. The dogboning varied from 31% to 46% for the polymer stents and was 62% for the metal stent, suggesting that less arterial damage could be expected with biopolymer stents. Various strut thicknesses were tested for the PLLA stent (114, 180 and 250[Formula: see text][Formula: see text]m) and no significant improvement in elastic recoil was observed. We concluded that the stent geometry has a greater impact on the scaffolding role of the structure than the strut thickness, or even the mechanical properties of the stent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.