Abstract
Problem statement: Palm oil milling generates solid wastes, effluent and gaseous emissions. The aim of this study is to assess the progress made in waste management by the Malaysian palm oil milling sector towards the path of sustainable development. Sustainable development is defined as the utilization of renewable resources in harmony with ecological systems. Inclusive in this definition is the transition from low value-added to higher value-added transformation of wastes into resources. Approach: A longitudinal study was carried out from 2003-2010 via, initially a field survey and subsequently a key informant approach with observation as a complementation for both. Results: Solid wastes, inclusive of solid wastes derived from air emissions and palm oil mil effluent, have a utility function with zero wastage. The principal source of effluent is palm oil mill effluent. Treated palm oil mill effluent is utilized for cropland application by plantation-based palm oil mills. However, independent mills discharge treated palm oil mill effluent in accordance to environmental parameters into receiving waterways. Methane is also released by palm oil mill effluent. Biogas from palm oil mill effluent and biomass energy from solid wastes are potential sources of renewable energy in Malaysia. Conclusion: In general, the wastes from palm oil milling are returned to the field for cropland application, utilized in-house or in the plantation, or sold to third parties. Thus, there is progress made towards sustainable development. The addition of new technologies and replacement of old mills will help to reduce the carbon footprint. However, at this juncture, the feed-in tariff for renewable energy is not financially attractive. If the biogas and biomass renewable energy sector were to take-off, enhancement in the value chain would occur and in tandem further progress towards sustainable development can be attained.
Highlights
Palm oil milling is basically the processing of oil palm Fresh Fruit Bunches (FFBs) into crude palm oil and palm kernel
The by-products or wastes are in the forms of Empty Fruit Bunches (EFBs), mesocarp fibers, shells, Palm Oil Mill Effluent (POME) and boiler ash
The aim of this study is to study the progress made by the Malaysian palm oil milling sector in managing its wastes towards the path in sustainable development
Summary
Palm oil milling is basically the processing of oil palm Fresh Fruit Bunches (FFBs) into crude palm oil and palm kernel. The by-products or wastes are in the forms of Empty Fruit Bunches (EFBs), mesocarp fibers, shells, Palm Oil Mill Effluent (POME) and boiler ash. The aim of this study is to study the progress made by the Malaysian palm oil milling sector in managing its wastes towards the path in sustainable development. The definition of sustainable development used in this study is based on the utilization of renewable resources in harmony with ecological systems. EFBs were incinerated and plantation-based palm oil mills returned the ashes to the field as fertilizer. Plantation-based mills return the EFBs to the fields for the superior process of mulching.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
