Packaging of Small-Scale Thermoelectric Generators for Autonomous Sensor Nodes

Abstract

This paper focuses on packaging of small-scale thermoelectric generators (TEGs) for energy harvesting applications in sensor nodes for industry 4.0 and for the Internet of Things. The TEGs are suitable to enable self-powered sensor systems with unlimited energy lifetime, but they have to withstand high mechanical loads during the assembly and packaging process and further stress due to the mismatch of the coefficient of thermal expansion of the different materials. Devices with different underfills (UFs) and stress decoupling thermal adhesives were evaluated with a shear force test apparatus and a four-line bending test together. In addition to these mechanical tests, the thermal influence of the UF on the system performance was investigated with measurements, finite element method, and computational fluid dynamics simulations. The shear force per area could be enhanced up to the factor of two by using capillary UF. All TEGs with and without UFs passed the reliability investigations without any electrical defects. All TEGs with UF passed the given quality criteria with the four-line bending test. With some of the stress decoupling thermal adhesives, the TEGs could withstand the loads without UF. The simulation model was evaluated with a measurement setup, and the differences between the simulation model and the measurements concerning the temperature difference of the TEGs were in an acceptable range (<21%). Furthermore, the influence of the UF on the temperature difference of the TEGs in the given measurement scenario was smaller than 15%, which makes the application of a UF a realistic approach.