Abstract
Abstract This paper discusses some design and implementation issues related to GaN micro-LED (μLED) incorporated into the heterogeneous packaging of IBM’s smart and secure sensor platform. For cost effective μLEDs, the sapphire substrate needs to be singulated reliably and with minimum kerf perimeter, be ultra-clean and smooth to allow back side emission without scattering, and high yielding front side flip chip bonding with 20μm C4s on 40μm pitch. The GaN μLEDs are design for low voltage/low power operation with an emission area of 20μm × 20μm with critical current density of ~10nA/μm2. Power and downlink data is delivered to the system via optical energy harvesting by on-silicon carrier photovoltaics and communication photodiode, respectively. Optical amplitude modulated uplink communication by heterogeneous packaging of the GaN μLED with a 14nm CMOS smart chip will be detailed and demonstrated in presentation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
