Abstract
This paper presents a study of both as-grown and annealed p-type Hg1−xCdxTe layers that were doped using a cadmium arsenide source. It is shown that by using a metalorganic molecular beam epitaxy system stable and reproducible p-type HgCdTe:As layers were obtained through direct homogeneous doping. The hole concentrations in the as-grown and annealed samples were 8 × 1016 to 3 × 1017 cm−3 with mobilities of 120∼300 cm2/V-s. The as-grown HgCdTe:As layers had very good crystalline quality with double crystal x-ray rocking curve line-widths ranging from 27 to 42 arc sec. Experimental data demonstrated a strong correlation of hole concentration and mobility with the surface morphology and crystalline quality as a function of Hg flux. The optimum growth window was defined by a narrow range of Hg flux values that gave a smooth film with fewer voids, and higher hole concentrations and mobilities than were obtained at lower or higher Hg fluxes. This correlation between the growth window defined by the surface morphology and the dopant behavior was very important for the successful growth of p-type As-doped HgCdTe materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have