Abstract
ABSTRACTIn this work, non-intentionally doped 3C-SiC epilayers were implanted using phosphorus at different energies and subsequently annealed at temperatures between 1100°C and 1350°C in order to form n+implanted layers. Different techniques such as Fourier Transformed InfraRed spectroscopy (FTIR) and Secondary Ion Mass Spectroscopy (SIMS) were used to characterize implanted 3C-SiC epilayers after the different annealing steps. Successively, metal layers were sputtered in order to form the contacts. The specific contact resistance (ñC) was determined by using circular Transfer Length Method (c-TLM) patterns. Specific contact resistance values were investigated as a function of doping and contact annealing conditions and compared to those obtained for highly doped 3C-SiC epilayers. As expected, ñC value is highly sensitive to post-implantation annealing and metal contact annealing. This work demonstrates that low resistance values can be achieved using phosphorus implantation and, hence, enabling device processing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.