Abstract

The off-gas method was used to study oxygen transfer efficiency in a long, narrow activated sludge basin. The basin was equipped with square, ceramic, fine pore diffuser plates arranged in a uniform longitudinal pattern at a depth of 4.3 m. Oxygen transfer efficiency, at 20°C and zero dissolved oxygen concentration, during the second and third years following diffuser cleaning, was between 15 and 17%. A uniform distribution of air to the tank was compared with a tapered air supply (more air at the inlet end and less at the outlet). The tapered air supply gave lower dissolved oxygen at the outlet and did not increase overall oxygen transfer. With a 3 to 5-fold variation in air flow, at either the inlet or outlet zone of the basin, the oxygen transfer efficiency, adjusted for zero dissolved oxygen, stayed constant.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.