Abstract
Production of microbial biosurfactants requires development of bioreactors enabling sufficient oxygen supply and foaming control. Gas–liquid mass transfer in a three-phase inverse fluidized bed reactor designed for biosurfactant production by Bacillus subtilis was studied. The influence of main parameters on kLa was investigated in model and real fermentation conditions. Oxygen transfer increased up to 175% and up to 24% with the increase of superficial gas and liquid velocities, respectively. The oxygen transfer obtained in the TPIFB bioreactor (kLa up to 0.015s−1) was higher than in the other bioreactors used for biosurfactant production. A significant decrease of kLa (up to 27%) was measured during fermentation process. It was shown that this decrease of kLa was a result of surface tension decrease due to the production of biosurfactants. However the oxygen transfer remained important and allowed a correct oxygen supply for the aerobic B. subtilis strains. A correlation based on dimensional analysis was proposed to estimate kLa in function of the influencing parameters, integrating surface tension effects. This correlation allowed estimating correctly kLa in the presence or not of solid particles. The correlation being based on dimensionless numbers, it could help for further process control and scale-up considerations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
