Abstract
In this work, we characterized and tested the oxygen permeation properties of BaCo0.85Bi0.05Zr0.1O3−δ (BCBZ) hollow fibre membranes fabricated by a combined phase inversion for spinning and sintering route using polyetherimide (PEI) as the polymer binder. The powder X-ray diffraction results showed that the BCBZ powder for spinning had to be calcined at around 950 °C to form a hexagonal phase structure, while the hollow fibre precursors were sintered at 1150–1200 °C to form the cubic perovskite structure for oxygen permeation. It displayed the highest oxygen flux of 7.3 cm3 (STP) cm−2 min−1at 950 °C under an air/He gradient. The theoretical correlation of the oxygen fluxes at different operating conditions showed that the oxygen permeation through BCBZ fibre was limited by surface exchange reactions. Carbon dioxide (CO2) resistance of BCBZ hollow fibre was tested by exposing it to alternating different sweep gas containing helium (He), 20% CO2 in He, 80% CO2 in He, and pure He. Despite the significant reduction in oxygen fluxes upon subjected to CO2-containing sweep gases due to the strong CO2 sorption on the membrane surface, no permanent damage on the membrane was detected and the original flux could be recovered at the end of the 105-h test once the sweep gas was switched back to helium. This result clearly highlights the high CO2 resistance of BCBZ hollow fibre membrane due to the presence of Zr4+ with higher acidity than Co2+ in BCBZ perovskite lattice. High CO2 tolerance enables the membrane use as membrane reactors for more advanced applications where the presence of CO2-containing atmosphere is unavoidable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.