Oxygen diffusion in basalt and andesite melts: experimental results and discussion of chemical versus tracer diffusion

Abstract

Chemical diffusion coefficients for oxygen in melts of Columbia River basalt (Ice Harbor Dam flow) and Mt. Hood andesite have been determined at 1 atm. The diffusion model is that of sorption or desorption of oxygen into a sphere of uniform initial concentration from a constant and semi-infinite atmosphere. The experimental design utilizes a thermogravimetric balance to monitor the rate of weight change arising from the response of the sample redox state to an imposed fO2. Oxygen diffusion coefficients are approximately an order-ofmagnitude greater for basaltic melt than for andesitic melt. At 1260° C, the oxygen diffusion coefficients are: D=1.65×10−6cm2/s and D=1.43×10−7cm2/s for the basalt and andesite melts, respectively. The high oxygen diffusivity in basaltic melt correlates with a high ratio of nonbridging oxygen/tetrahedrally coordinated cations, low melt viscosity, and high contents of network-modifying cations. The dependence of the oxygen diffusion coefficient on temperature is: D=36.4exp(−51,600±3200/RT)cm2/s for the basalt and D=52.5exp(−60,060±4900/RT)cm2/s for the andesite (R in cal/deg-mol; T in Kelvin). Diffusion coefficients are independent of the direction of oxygen diffusion (equilibrium can be approached from extremely oxidizing or reducing conditions) and thus, melt redox state. Characteristic diffusion distances for oxygen at 1260° C vary from 10-2 to 102 m over the time interval of 1 to 106 years. A compensation diagram shows two distinct trends for oxygen chemical diffusion and oxygen tracer diffusion. These different linear relationships are interpreted as supporting distinct oxygen transport mechanisms. Because oxygen chemical diffusivities are generally greater than tracer diffusivities and their Arrhenius activation energies are less, transport mechanisms involving either molecular oxygen or vacancy diffusion are favored.