Abstract
A novel process has been investigated to enable CO2 to be isolated as a concentrated stream from the exhaust of a power station, without the use of separate, downstream capture technology. In this concept, a fluidised bed gasifier is operated with pure O2 and CO2, recycled from the combusted fuel gas stream, combining the advantages of gasification, fluidised bed operation and use of oxygen. With the combination of CO2 capture and biomass as the feedstock, net negative emissions can be achieved. This is the fifth in a series of papers which investigate the underlying science of the concept. It studies the influence of the use of different coals and mixtures containing coal/biomass on the process performance. A continuously fed, laboratory scale spouted bed reactor has been used for this study, and Daw Mill coal (DM), German lignite (GL), Polish coal (PC) and Olive bagasse (OB) were used as fuels. Carbon conversions for DM and PC were around 20–30% and dominated by release by pyrolysis. High conversions (60–80%) were observed for GL and the char showed an appreciable gasification reactivity. Co-processing of OB with GL proved to be a good way to further improve the overall process performance and complete conversion was achieved under some conditions. Processing biomass with lignite, with CO2 capture, is a technically viable way of producing energy from a waste material with a negative process carbon footprint.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.