Abstract
In the paper, a modified Plasma Electrolytic Oxidation process (PEO) to produce ceramic coatings on Al alloys, suitable for tribological applications, is discussed. The process utilises bipolar current pulses in the kHz frequency range, providing better control over plasma discharges occurring at the sample surface. The coatings, formed on a 2024 series Al alloy, are characterized by means of optical microscopy, SEM, EDX, XRD and surface profilometry. Microhardness and scratch adhesion tests are performed to evaluate the coating mechanical performance. The effects of current pulse frequency on both the layer growth kinetics and the process energy efficiency are discussed. It is found that in the 1 to 3 kHz frequency range, the layer growth rate can be increased from 0.5 to 1 to 1.6 to 3.2 μm min −1 and the volume fraction of the porous outer layer can be reduced from 25 to 20% to 15 to 10% of the total layer thickness, compared to the conventional 50 Hz AC PEO process. The inner layer, despite a slight increase in porosity, preserves a relatively high hardness of 1200 to 1500 HK 25 and good adhesion ( L C2=60 N), which should be sufficient for many tribological applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
