OXIDATIVE REGENERATION OF METAL COMPLEX CATALYTIC SYSTEM

Abstract

When carrying out thermocatalytic destruction of hydrocarbon feedstock, catalysts are deactivated due to the formation of surface coke, which blocks active centers. In order to restore their previous activity and selectivity, as well as extend their service life, a process of catalyst regeneration is carried out. One of the effective methods for restoring the original activity of deactivated catalysts is oxidative regeneration, which is based on the oxidation of coke deposits on the surface of the catalyst. The article examines the dependences of the formation of surface coke when varying the temperature regime of the process from 450 °C to 550 °C during the thermocatalytic destruction of heavy petroleum feedstock – West Siberian oil fuel oil in the presence of a new metal complex catalytic system, where the active component is a chloroferrate complex (NaFeCl4 or TCFN) in an amount 10 %, deposited on a carrier, which is a deeply decationized Ymmm zeolite of the acidic form (H-form). The patterns of oxidative regeneration of a metal-complex catalytic system were studied by distilling off highly volatile products in a flow of inert gas (helium) and oxygen-containing gas. During the experiments, it was found that with an increase in the temperature of the thermocatalytic destruction process from 450 °C to 550 °C, a slight increase in coarse deposits on the surface of the catalyst was observed from 2,6 % wt. up to 3,5 % wt. respectively. When carrying out the process of oxidative regeneration of a carbonized catalyst with air oxygen (in a flow of helium) at a temperature of 500 °C for 60 min only volatile components are initially removed, and further calcination takes up to 180 min allows for complete burning of surface coke.