Oxidative Flotation Separation of Chalcopyrite and Pyrite Using K2FeO4 in Seawater

Abstract

ABSTRACT The oxidative flotation separation of chalcopyrite from pyrite in weak alkaline seawater solution was investigated using potassium ferrate (K2FeO4) as the oxidizing reagent. The optimal K2FeO4 concentration of 0.25 kg/t was found to strongly depress pyrite (from 88.05% to 7.92%) but insignificantly influence chalcopyrite (remaining at around 93%). K2FeO4 oxidized pyrite to form hydrophilic Fe2O3, Fe(OH)3, FeOOH, and Fe2(SO4)3 that covering on pyrite surface to prevent the adsorption of collector sodium butyl xanthate (SBX), thereby depressing pyrite flotation. Although a small amount of hydrophilic species was formed on chalcopyrite surface after the addition of K2FeO4, some hydrophobic substances such as S2 2-/Sn 2-/S0 were also observed, resulting in an unaffected overall floatability. Further, density functional theory (DFT) calculation proved that the activity of Fe on chalcopyrite surface was much lower than that on pyrite. Therefore, this study provides a green way to separate chalcopyrite from pyrite effectively in a low-alkali seawater system, which is of significance to the separation of sulfide minerals in the fresh water-lack areas.