Abstract
Pure MgO samples having greatly different morphologies and lithium-promoted catalysts derived from these materials have been examined by electron microscopy. In addition, their ability to generate and react with gas-phase methyl radicals has been determined using e.s.r. in combination with a matrix-isolation technique. Lithium caused the MgO to sinter severely at 700 °C, but the resulting material showed improved activity for the generation of methyl radicals. These factors gave rise to catalysts which were moderately active and selective for the oxidative dimerization of CH4 at 700 °C (up to 20% conversion, 66% C2+ selectivity). The results are particularly significant in that catalysts which had been prepared such that the lithium was initially present as Li2O on the surface exhibited almost constant C2+ production as the Li2O was converted to Li2CO3. Thus, neither Li2O nor Li2CO3 is the active phase for the selective conversion of CH4. A catalyst prepared from Li2CO3 and MgO sintered much less extensively, produced more CH3˙ radicals and gave higher yields of C2+ hydrocarbons. A comparison of these catalytic properties suggests that surface area and related morphological factors do not have an adverse effect on the oxidative dimerization reaction, provided the surface can be rendered inert to secondary reactions with methyl radicals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have