Oxidative cleavage of polysaccharides by monocopper enzymes depends on H2O2.

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes that catalyze oxidative cleavage of glycosidic bonds in polysaccharides in the presence of an external electron donor (reductant). In the classical O2-driven monooxygenase reaction, the reductant is needed in stoichiometric amounts. In a recently discovered, more efficient H2O2-driven reaction, the reductant would be needed only for the initial reduction (priming) of the LPMO to its catalytically active Cu(I) form. However, the influence of the reductant on reducing the LPMO or on H2O2 production in the reaction remains undefined. Here, we conducted a detailed kinetic characterization to investigate how the reductant affects H2O2-driven degradation of 14C-labeled chitin by a bacterial LPMO, SmLPMO10A (formerly CBP21). Sensitive detection of 14C-labeled products and careful experimental set-ups enabled discrimination between the effects of the reductant on LPMO priming and other effects, in particular enzyme-independent production of H2O2 through reactions with O2 When supplied with H2O2, SmLPMO10A catalyzed 18 oxidative cleavages per molecule of ascorbic acid, suggesting a "priming reduction" reaction. The dependence of initial rates of chitin degradation on reductant concentration followed hyperbolic saturation kinetics, and differences between the reductants were manifested in large variations in their half-saturating concentrations (KmRapp). Theoretical analyses revealed that KmRapp decreases with a decreasing rate of polysaccharide-independent LPMO reoxidation (by either O2 or H2O2). We conclude that the efficiency of LPMO priming depends on the relative contributions of reductant reactivity, on the LPMO's polysaccharide monooxygenase/peroxygenase and reductant oxidase/peroxidase activities, and on reaction conditions, such as O2, H2O2, and polysaccharide concentrations.

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes that degrade the insoluble crystalline polysaccharides cellulose and chitin. Besides the H2O2 cosubstrate, the cleavage of glycosidic bonds by LPMOs depends on the presence of a reductant needed to bring the enzyme into its reduced, catalytically active Cu(I) state. Reduced LPMOs that are not bound to substrate catalyze reductant peroxidase reactions, which may lead to oxidative damage and irreversible inactivation of the enzyme. However, the kinetics of this reaction remain largely unknown, as do possible variations between LPMOs belonging to different families. Here, we describe the kinetic characterization of two fungal family AA9 LPMOs, TrAA9A of Trichoderma reesei and NcAA9C of Neurospora crassa, and two bacterial AA10 LPMOs, ScAA10C of Streptomyces coelicolor and SmAA10A of Serratia marcescens. We found peroxidation of ascorbic acid and methyl-hydroquinone resulted in the same probability of LPMO inactivation (pi), suggesting that inactivation is independent of the nature of the reductant. We showed the fungal enzymes were clearly more resistant toward inactivation, having pi values of less than 0.01, whereas the pi for SmAA10A was an order of magnitude higher. However, the fungal enzymes also showed higher catalytic efficiencies (kcat/KM(H2O2)) for the reductant peroxidase reaction. This inverse linear correlation between the kcat/KM(H2O2) and pi suggests that, although having different life spans in terms of the number of turnovers in the reductant peroxidase reaction, LPMOs that are not bound to substrates have similar half-lives. These findings have not only potential biological but also industrial implications.

Engineering lytic polysaccharide monooxygenases (LPMOs).

Lytic polysaccharide monooxygenases (LPMOs) are mono-copper enzymes that catalyze oxidative depolymerization of recalcitrant substrates such as chitin or cellulose. Recent work has shown that LPMOs catalyze fast peroxygenase reactions and that, under commonly used reaction set-ups, access to in situ generated H2O2 likely limits catalysis. Based on a hypothesis that the impact of a cellulose-binding module (CBM) on LPMO activity could relate to changes in in situ H2O2 production, we have assessed the interplay between CBM-containing ScLPMO10C and its truncated form comprising the catalytic domain only (ScLPMO10CTR). The results show that truncation of the linker and CBM leads to elevated H2O2 production and decreased enzyme stability. Most interestingly, combining the two enzyme forms yields strong synergistic effects, which are due to the combination of high H2O2 generation by ScLPMO10CTR and efficient productive use of H2O2 by the full-length enzyme. Thus, cellulose degradation becomes faster, while enzyme inactivation due to off-pathway reactions with excess H2O2 is reduced. These results underpin the complexity of ascorbic acid-driven LPMO reactions and reveal a potential mechanism for how LPMOs may interact synergistically during cellulose degradation.

Bacterial and fungal lytic polysaccharide monooxygenase (LPMO) play an important role for cleavage and conversion of recalcitrant polysaccharides. Notwithstanding, their modes of action has persisted largely obscure till the high-resolution structure was revealed. Alongside, modality of binding of LPMO active site for insoluble substrates and redox site were revealed. The LPMOs disrupt the crystalline packing of cellulose microfibrils to create new chain ends for hydrolase enzymes. LPMOs contain a mononuclear Cu(II) center which is being responsible for C-H hydroxylation. In LPMOs action mechanism, the role of co-substrates (O2 or H2O2) is to oxidize polysaccharide with core of cellobiohydrgenase, endoglucanases, and β-glucosidases. Therefore, LPMOs reduces O2 in the coupled hydroxylation of substrate and utilizes H2O2 generates from the coupled reduction of O2. The co-substrates and copper-active site dependent mechanism are linked with a Cu reduction to Cu(I) with non-specific oxidation by H2O2 and regiospecific substrate oxidation. This article focuses on structural and reactivity of LPMOs for wood biomass degradation by the reduction of active site copper prior to the O2 activation. The major areas that are focused: (1) spectroscopic analysis of three-dimensional structures of LPMOs (AA9 to AA13), (2) conformation of polysaccharides, (3) catalytic domains, (4) role in cellulose accessibility, (5) penetration and movement on cellulose ribbons. Additionally, structural evolution of the LPMOs, their role in oxidative mechanisms and redox site determination are reviewed. The choice of redox partner and evolution is linked with biorefinery applications for starch, cellulose, and chitin that possess tight organization of polymers with low hydration levels. Mysterious substrate dependence of the LPMO reactivity with H2O2 was reviewed to emphasize how the power of LPMO improved further. Prospects of current biorefinery applications of LPMOs were discussed with an emphasis of fungal species.

Action of AA9 lytic polysaccharide monooxygenase enzymes on different cellulose allomorphs

ABSTRACTFungi secrete a set of glycoside hydrolases and lytic polysaccharide monooxygenases (LPMOs) to degrade plant polysaccharides. Brown-rot fungi, such as Gloeophyllum trabeum, tend to have few LPMOs, and information on these enzymes is scarce. The genome of G. trabeum encodes four auxiliary activity 9 (AA9) LPMOs (GtLPMO9s), whose coding sequences were amplified from cDNA. Due to alternative splicing, two variants of GtLPMO9A seem to be produced, a single-domain variant, GtLPMO9A-1, and a longer variant, GtLPMO9A-2, which contains a C-terminal domain comprising approximately 55 residues without a predicted function. We have overexpressed the phylogenetically distinct GtLPMO9A-2 in Pichia pastoris and investigated its properties. Standard analyses using high-performance anion-exchange chromatography–pulsed amperometric detection (HPAEC-PAD) and mass spectrometry (MS) showed that GtLPMO9A-2 is active on cellulose, carboxymethyl cellulose, and xyloglucan. Importantly, compared to other known xyloglucan-active LPMOs, GtLPMO9A-2 has broad specificity, cleaving at any position along the β-glucan backbone of xyloglucan, regardless of substitutions. Using dynamic viscosity measurements to compare the hemicellulolytic action of GtLPMO9A-2 to that of a well-characterized hemicellulolytic LPMO, NcLPMO9C from Neurospora crassa revealed that GtLPMO9A-2 is more efficient in depolymerizing xyloglucan. These measurements also revealed minor activity on glucomannan that could not be detected by the analysis of soluble products by HPAEC-PAD and MS and that was lower than the activity of NcLPMO9C. Experiments with copolymeric substrates showed an inhibitory effect of hemicellulose coating on cellulolytic LPMO activity and did not reveal additional activities of GtLPMO9A-2. These results provide insight into the LPMO potential of G. trabeum and provide a novel sensitive method, a measurement of dynamic viscosity, for monitoring LPMO activity.IMPORTANCE Currently, there are only a few methods available to analyze end products of lytic polysaccharide monooxygenase (LPMO) activity, the most common ones being liquid chromatography and mass spectrometry. Here, we present an alternative and sensitive method based on measurement of dynamic viscosity for real-time continuous monitoring of LPMO activity in the presence of water-soluble hemicelluloses, such as xyloglucan. We have used both these novel and existing analytical methods to characterize a xyloglucan-active LPMO from a brown-rot fungus. This enzyme, GtLPMO9A-2, differs from previously characterized LPMOs in having broad substrate specificity, enabling almost random cleavage of the xyloglucan backbone. GtLPMO9A-2 acts preferentially on free xyloglucan, suggesting a preference for xyloglucan chains that tether cellulose fibers together. The xyloglucan-degrading potential of GtLPMO9A-2 suggests a role in decreasing wood strength at the initial stage of brown rot through degradation of the primary cell wall.

The worldwide accumulation of plastic waste in the environment, along with its lifespan of hundreds of years, represents a serious threat to ecosystems. Enzymatic recycling of plastic waste offers a promising solution, but the high chemical inertness and hydrophobicity of plastics pose several challenges to enzymes. In nature, lytic polysaccharide monooxygenases (LPMOs) can act at the surface of recalcitrant biopolymers, taking advantage of their solvent-exposed active sites and appended carbohydrate-binding modules (CBMs). LPMOs can disrupt the densely packed chains of polysaccharides (e.g., cellulose) by the oxidation of C-H bonds. Given the similarities between these natural and artificial polymers, we aimed here at promoting plastic-binding properties to LPMOs, by swapping their CBM with three natural, surface-active accessory modules displaying different amphipathic properties. The polymer binding capacity of the resulting LPMO chimeras was assessed on a library of synthetic polymers, including polyester, polyamide, and polyolefin substrates. We demonstrated that the plastic binding properties of these engineered LPMOs are polymer-dependent and can be tuned by playing on the nature of the accessory module and reaction conditions. Remarkably, we gained full binding for some chimera LPMOs with striking results for polyhydroxyalkanoates (PHA). In the long term perspective of harnessing the unique copper chemistry of LPMOs to degrade plastics, we also provided the first evidence of LPMO-dependent modification of the PHA polymer, as supported by enzyme assays, gel permeation chromatography, and scanning electron microscopy. Altogether, our study provides the first roadmap for engineering plastic-binding ability in LPMOs, constituting a crucial first step on the evolutionary path toward efficient interfacial catalysis of plastic-active enzymes.

Lytic polysaccharide monooxygenases (LPMOs) catalyze oxidative cleavage of recalcitrant polysaccharides such as cellulose and chitin and play an important role in the enzymatic degradation of biomass. Although it is clear that these monocopper enzymes have extended substrate-binding surfaces for interacting with their fibrous substrates, the structural determinants of LPMO substrate specificity remain largely unknown. To gain additional insight into substrate specificity in LPMOs, here we generated a mutant library of a cellulose-active family AA10 LPMO from Streptomyces coelicolor A3(2) (ScLPMO10C, also known as CelS2) having multiple substitutions at five positions on the substrate-binding surface that we identified by sequence comparisons. Screening of this library using a newly-developed MS-based high-throughput assay helped identify multiple enzyme variants that contained four substitutions and exhibited significant chitinolytic activity and a concomitant decrease in cellulolytic activity. The chitin-active variants became more rapidly inactivated during catalysis than a natural chitin-active AA10 LPMO, an observation likely indicative of suboptimal substrate binding leading to autocatalytic oxidative damage of these variants. These results reveal several structural determinants of LPMO substrate specificity and underpin the notion that productive substrate binding by these enzymes is complex, depending on a multitude of amino acids located on the substrate-binding surface.

BackgroundEnzyme-aided valorization of lignocellulose represents a green and sustainable alternative to the traditional chemical industry. The recently discovered lytic polysaccharide monooxygenases (LPMOs) are important components of the state-of-the art enzyme cocktails for cellulose conversion. Yet, these monocopper enzymes are poorly characterized in terms of their kinetics, as exemplified by the growing evidence for that H2O2 may be a more efficient co-substrate for LPMOs than O2. LPMOs need external electron donors and one key question of relevance for bioprocess development is whether the required reducing power may be provided by the lignocellulosic substrate.ResultsHere, we show that the liquid fraction (LF) resulting from hydrothermal pretreatment of wheat straw supports LPMO activity on both chitin and cellulose. The initial, transient activity burst of the LPMO reaction was caused by the H2O2 present in the LF before addition of LPMO, while the steady-state rate of LPMO reaction was limited by the LPMO-independent production of H2O2 in the LF. H2O2 is an intermediate of LF oxidation as evidenced by a slow H2O2 accumulation in LF, despite high H2O2 production rates. This H2O2 scavenging ability of LF is important since high concentrations of H2O2 may lead to irreversible inactivation of LPMOs.ConclusionsOur results support the growing understanding that fine-tuned control over the rates of H2O2 production and consumption in different, enzymatic and non-enzymatic reactions is essential for harnessing the full catalytic potential of LPMOs in lignocellulose valorization.

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes secreted by many organisms and viruses. LPMOs catalyze the oxidative cleavage of different types of polysaccharides and are today divided into eight families (AA9–11, AA13–17) within the Auxiliary Activity enzyme class of the CAZy database. LPMOs minimal architecture encompasses a catalytic domain, to which can be appended a carbohydrate-binding module. Intriguingly, we observed that some LPMO sequences also display a C-terminal extension of varying length not associated with any known function or fold. Here, we analyzed 27,060 sequences from different LPMO families and show that 60% have a C-terminal extension predicted to be intrinsically disordered. Our analysis shows that these disordered C-terminal regions (dCTRs) are widespread in all LPMO families (except AA13) and differ in terms of sequence length and amino-acid composition. Noteworthily, these dCTRs have so far only been observed in LPMOs. LPMO-dCTRs share a common polyampholytic nature and an enrichment in serine and threonine residues, suggesting that they undergo post-translational modifications. Interestingly, dCTRs from AA11 and AA15 are enriched in redox-sensitive, conditionally disordered regions. The widespread occurrence of dCTRs in LPMOs from evolutionarily very divergent organisms, hints at a possible functional role and opens new prospects in the field of LPMOs.

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes of industrial and biological importance. In particular, LPMOs play important roles in fungal lifestyle. No inhibitors of LPMOs have yet been reported. In this study, a diverse library of 100 plant extracts was screened for LPMO activity-modulating effects. By employing protein crystallography and LC-MS, we successfully identified a natural LPMO inhibitor. Extract screening revealed a significant LPMO inhibition by methanolic extract of Cinnamomum cassia (cinnamon), which inhibited LsAA9A LPMO from Lentinus similis in a concentration-dependent manner. With a notable exception, other microbial LPMOs from families AA9 and AA10 were also inhibited by this cinnamon extract. The polyphenol cinnamtannin B1 was identified as the inhibitory component by crystallography. Cinnamtannin B1 was bound to the surface of LsAA9A at two distinct binding sites: one close to the active site and another at a pocket on the opposite side of the protein. Independent characterization of cinnamon extract by LC-MS and subsequent activity measurements confirmed that the compound inhibiting LsAA9A was cinnamtannin B1. The results of this study show that specific natural LPMO inhibitors of plant origin exist in nature, providing the opportunity for future exploitation of such compounds within various biotechnological contexts.

For decades, the enzymatic conversion of cellulose was thought to rely on the synergistic action of hydrolytic enzymes, but recent work has shown that lytic polysaccharide monooxygenases (LPMOs) are important contributors to this process. We describe the structural and functional characterization of two functionally coupled cellulose-active LPMOs belonging to auxiliary activity family 10 (AA10) that commonly occur in cellulolytic bacteria. One of these LPMOs cleaves glycosidic bonds by oxidation of the C1 carbon, whereas the other can oxidize both C1 and C4. We thus demonstrate that C4 oxidation is not confined to fungal AA9-type LPMOs. X-ray crystallographic structures were obtained for the enzyme pair from Streptomyces coelicolor, solved at 1.3 Å (ScLPMO10B) and 1.5 Å (CelS2 or ScLPMO10C) resolution. Structural comparisons revealed differences in active site architecture that could relate to the ability to oxidize C4 (and that also seem to apply to AA9-type LPMOs). Despite variation in active site architecture, the two enzymes exhibited similar affinities for Cu(2+) (12-31 nM), redox potentials (242 and 251 mV), and electron paramagnetic resonance spectra, with only the latter clearly different from those of chitin-active AA10-type LPMOs. We conclude that substrate specificity depends not on copper site architecture, but rather on variation in substrate binding and orientation. During cellulose degradation, the members of this LPMO pair act in synergy, indicating different functional roles and providing a rationale for the abundance of these enzymes in biomass-degrading organisms.

Lytic polysaccharide monooxygenases (LPMOs) are monocopper enzymes that oxidatively degrade various polysaccharides, such as cellulose. Despite extensive research on this class of enzymes, the role played by their C-terminal regions predicted to be intrinsically disordered (dCTR) has been overlooked. Here, we investigated the function of the dCTR of an LPMO, called CoAA9A, up-regulated during plant infection by Colletotrichum orbiculare, the causative agent of anthracnose. After recombinant production of the full-length protein, we found that the dCTR mediates CoAA9A dimerization in vitro, via a disulfide bridge, a hitherto-never-reported property that positively affects both binding and activity on cellulose. Using SAXS experiments, we show that the homodimer is in an extended conformation. In vivo, we demonstrate that gene deletion impairs formation of the infection-specialized cell called appressorium and delays penetration of the plant. Using immunochemistry, we show that the protein is a dimer not only in vitro but also in vivo when secreted by the appressorium. As these peculiar LPMOs are also found in other plant pathogens, our findings open up broad avenues for crop protection.

Lytic polysaccharide monooxygenases (LPMOs) are mono-copper enzymes that use O2 or H2O2 to oxidatively cleave glycosidic bonds. LPMOs are prevalent in nature, and the functional variation among these enzymes is a topic of great interest. We present the functional characterization of one of the 22 putative AA9-type LPMOs from the fungus Schizophyllum commune, ScLPMO9A. The enzyme, expressed in Escherichia coli, showed C4-oxidative cleavage of amorphous cellulose and soluble cello-oligosaccharides. Activity on xyloglucan, mixed-linkage β-glucan, and glucomannan was also observed, and product profiles differed compared to the well-studied C4-oxidizing NcLPMO9C from Neurospora crassa. While NcLPMO9C is also active on more crystalline forms of cellulose, ScLPMO9A is not. Differences between the two enzymes were also revealed by nuclear magnetic resonance (NMR) titration studies showing that, in contrast to NcLPMO9C, ScLPMO9A has higher affinity for linear substrates compared to branched substrates. Studies of H2O2-fueled degradation of amorphous cellulose showed that ScLPMO9A catalyzes a fast and specific peroxygenase reaction that is at least two orders of magnitude faster than the apparent monooxygenase reaction. Together, these results show that ScLPMO9A is an efficient LPMO with a broad substrate range, which, rather than acting on cellulose, has evolved to act on amorphous and soluble glucans.