Abstract
Abstract This article presents the results of research on resistance to isothermal oxidation of Ti-46Al-7Nb-0,7Cr-0,1Si-0,2Ni alloy with AlCrN layer applied. The reference material was a Ti-46Al-7Nb-0,7Cr-0,1Si-0,2Ni alloy in initial state without any coating deposited. The protective coating was deposited by PVD process. Attempts at isothermal oxidation in air were performed at 900 and 950°C during 250h. Measurements of the samples’ mass were taken with the accuracy of 10-4 g. An analysis of the obtained results was made: chemical composition analysis, phase analysis of the deposited coating and chemical composition analysis of the alloy surface with the coating deposited after oxidation tests. In the case of the oxidation of alloy in initial state, pronouncedly higher mass gain and ”deferred” scale chipping was noticed. The deposited AlCrN coating significantly reduces spalling processes and makes for lesser mass gain of the oxidized alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
