Oxidation and erosion resistance of multi-layer SiC nanowires reinforced SiC coating prepared by CVD on C/C composites in static and aerodynamic oxidation environments

Abstract

A multi-layer SiC nanowires reinforced SiC (SiCnws-SiC) coating was prepared in-situ on carbon/carbon (C/C) composites by three chemical vapor deposition (CVD) processes. The microstructure and phase composition of the nanowires fabricated on the first-layer SiCnws-SiC coating and the coatings were examined by SEM, TEM, and XRD. The bamboo-like SiC nanowires with a 50 nm diameter and a length of several tens of micrometers are straight, randomly orientated and distributed like a net on the first-layer SiCnws-SiC coating. The growth direction is [111], and the growth mechanism is VS. The multi-layer SiCnws-SiC coating has three layers: the thickness of the first-layer is roughly 400 µm, and the outer two layers are about 200 µm. Each layer has a sandwich structure. The isothermal oxidation and erosion resistance of the multi-layer SiCnws-SiC coating were investigated in an electrical furnace and a high temperature wind tunnel. The results indicated that the weight loss of the multi-layer SiCnws-SiC coated C/C composites was only 1.8% after oxidation in static air at 1773 K for 361 h. Further, the coated sample failed due to fracture of the coating at the clamping position (i.e. 80 mm) after erosion at 1873 K for 130 h in the wind tunnel. The weight loss of the coated C/C composites occurred due to the formation of penetrating cracks in the coating during the oxidation thermal shock. The maximum bending moment and the larger clamping force caused the coating fracture and resulted in intense oxidation of the substrate and the failure of the specimen.