Abstract
Continuous flow microwave heating is a promising alternative to conventional heating for aseptic processing of low-acid vegetable purees. However, non-uniform temperature distribution and control of processing parameters are the major hurdles in the implementation of continuous flow microwave heating. This study was undertaken to overcome issues associated with the scale-up of a continuous flow microwave system from pilot plant scale to industrial scale and to conduct extended run times of 8 h based on the procedure developed. Dielectric properties and cross-sectional temperature profiles were measured during processing of green pea puree and carrot puree from 20 to 130 °C in a 5-kW continuous flow microwave system. During processing of green peas, cross-sectional temperature differences of 8.6 and 5 °C were observed at the outlet for center temperatures of 50 and 130 °C respectively. These temperature differences were 32.9 and 3.6 °C for carrot puree. For process scale-up, green pea puree and carrot puree were processed in a 60-kW microwave system with the objective of successful operation for at least 8 h. Static mixers, installed at the exit of each of the microwave applicators, improved temperature uniformity for both purees. Successful completion of processing the purees for 8 h in the 60-kW microwave system showed the potential for the scale-up of a continuous flow microwave system from pilot plant scale to industrial scale.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.