Over 18% Efficiency Ternary Organic Solar Cells with 300nm Thick Active Layer Enabled by an Oligomeric Acceptor.

Abstract

The development of high-efficiency thickness-insensitive organic solar cells (OSCs) is crucially important for the mass production of solar panels. However, increasing the active layer thickness usually induces a substantial loss in efficiency. Herein, a ternary strategy in which an oligomer DY-TF is incorporated into PM6:L8-BO system as a guest component is adopted to break this dilemma. The S···F intramolecular noncovalent interactions in the backbone endow DY-TF with a high planarity. Upon the addition of DY-TF, the crystallinity of the blend is effectively improved, leading to increased charge carrier mobility, which is highly desirable in the fabrication of thick-film devices. As a result, thin-film PM6:L8-BO:DY-TF-based device (110nm) shows a power conversion efficiency (PCE) of 19.13%. Impressively, when the active layer thickness increases to 300nm, an efficiency of 18.23% (certified as 17.8%) is achieved, representing the highest efficiency reported for 300 nm thick OSCs thus far. Additionally, blade-coated thick device (300nm) delivers a promising PCE of 17.38%. This work brings new insights into the construction of efficient OSCs with high thickness tolerance, showing great potential for roll-to-roll printing of large-area solar cells.