Output-Only Time-Varying Modal Parameter Identification Method Based on the TARMAX Model for the Milling of a Thin-Walled Workpiece.

Abstract

The process parameters chosen for high-performance machining in the milling of a thin-walled workpiece are determined by a stability prediction model, which needs accurate modal parameters of the machining system. However, the in-process modal parameters are different from the offline modal parameters and are difficult to precisely obtain due to material removal. To address this problem, an accurate time-dependent autoregressive moving average with an exogenous input (TARMAX) method is proposed for the identification of the modal parameters in the milling of a thin-walled workpiece. In this process, a TARMAX model considering external force excitation is constructed to characterize the actual condition in the milling of a thin-walled workpiece. Then, recursive method and sliding window recursive method are used to identify TARMAX model parameters under time-varying cutting conditions. Subsequently, a three-degree of freedom (3-DOF) time-varying structure numerical model under theoretical milling forces and white-noise excitation is established, and the computational results show that the predicted natural frequencies using the proposed method are in close agreement with the simulated values. Finally, several experiments are designed and carried out to validate the effectiveness of the proposed method. The experimental results show that the predicted accuracy of the proposed method using actual cutting forces is 95.68%. Good agreement has been drawn in the numerical simulation and machining experiments. Our further research objectives will focus on the prediction of the damping ratios, modal stiffness, and modal mass.