Abstract
AbstractA measurement of nitrogen out‐diffusion from nitrogen‐doped float‐zone silicon made using a dislocation locking technique is presented. Specimens containing a well‐defined array of dislocation half‐loops are subjected to identical anneals at 750 °C, during which nitrogen diffuses both to the surface and to the dislocations. The specimens are then chemically etched so as to remove different thicknesses of material from the surface. The stress required to move the dislocations away from the nitrogen is then measured. The variation in this unlocking stress with thickness of material removed allows some measure of nitrogen diffusivity to be deduced. The result obtained is consistent with an extrapolation of SIMS out‐diffusion measurements previously performed at higher temperatures, but indicates a different activation energy for out‐diffusion to that associated with dislocation locking by nitrogen. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.