Osseointegration enhanced by chemical etching of the titanium surface. A torque removal study in the rabbit.

Abstract

Roughened implant surfaces are thought to enhance osseointegration. Torque removal forces have been used as a biomechanical measure of anchorage or osseointegration in which the greater forces required to remove implants may be interpreted as an increase in the strength of osseointegration. The purpose of this study was to compare the torque resistance to removal of screw shaped titanium implants having an acid etched (HC1/H2SO4) surface (Osseotite) with implants having a machined surface. Two custom screw shaped implants, 1 acid etched and the other machined, were placed into the distal femurs of 10 adult New Zealand White rabbits. These implants were 3.25 mm in diameter x 4.00 mm in length without holes, grooves or slots to resist rotation. Following a 2 month healing period, the implants were removed under reverse torque rotation with a digital torque measuring device. Two implants with the machined surface preparation failed to achieve osseointegration. All other implants were found to be anchored to bone. Resistance to torque removal was found to be 4 x greater for the implants with the acid etched surface as compared to the implants with the machined surface. The mean torque values were 20.50 +/- 6.59 N cm and 4.95 +/- 1.61 N cm for the acid etched and machined surfaces respectively. The results of this study suggest that chemical etching of the titanium implant surface significantly increases the strength of osseointegration as determined by resistance to reverse torque rotation.